Hexcorder Pro CIPS/DCVG/ACVG/GIS Surveys

Features

  • 10 different survey modes including Close Interval (CIPS), multiple DCVG channels, multiple impedance
  • Work with interruption cycles as fast as 1 second
  • User customizable alarms for change in potential, DCVG indication & broken trailing wire can be enabled to help ensure data integrity
  • Records chainage, date, time, altitude and GPS location data with each reading
  • Integrate with all Bluetooth enabled Radio Detection and Vivax Metrotech pipe locators to store depth of cover and signal strength data with CIPS & DCVG readings
  • Active AC filter to remove the effect of induced AC up to 100V
  • Run time of Hexcorder Pro is 24 hours, tablet is 11 hours under field conditions, optional extra batteries are available for the tablet
  • Rugged, sealed, quick connect push-pull connectors
  • Reads and stores waveforms
  • Comments can be easily entered into the data stream
  • User programmable GPS offset to work in local time
  • App support multiple languages
  • Designed to satisfy IP65 and EN61010 standards
  • Comprehensive 2 year warranty
Category:

Description

Spec Sheet

Manual

 

DCVG / CIPS combinedBenefits

  • Can perform four different types of survey at the same time, CIPS,
    DCVG, ACVG and GIS mapping
    • All data obtained at the same place & time under the same field conditions
    • Easily correlate cathodic protection data with coating integrity data to better prioritize remediation
    • Stored waveforms allow the user to capture electrical interference
    • GPS location data can be imported into mapping software
    • Available integration with Bluetooth enabled pipe locators allows storage of depth of cover and signal strength data
    • PODS compatible data stored as a .csv text file
    • No special software required
    • Easy to open and graph in any standard spreadsheet or import into your database program
    • Software upgradeable by customer
    • Optional sub-meter GPS with <10cm global precision available
    • Optional custom tailored on-site survey training is available
    • Comprehensive 2 year warranty!

User Experience

  • Purpose built by corrosion professionals for corrosion
    professionals
    • Large rugged Mil Spec touchscreen tablet user interface
    • Custom graphics based App, easy to navigate, easy to learn
    • Multiple languages supported
    • View any 2 of 5 available screens … Table, Graph, Map, Bird’s Eye, Analog Gauge

    

                  

Included

  • • Hexcorder Pro assembly with integrated tablet • Wire dispenser with one spool of survey wire • Choice of:  Hip pack – short surveys, urban areas 2 km (1.25 mile) survey wire OR Back pack – long, across country surveys 16 km (10 mile) survey wire • 2 x half cell extension poles • 2 x Cu/CuSO4 reference electrodes • Ergonomic four point shoulder harness • Survey pole and wire dispenser cables • WAAS enabled GPS antenna • Universal AC chargers for Hexcorder Pro and tablet • USB cable • Rugged carrying case • Operation manual

Technical Specification

  • • CIPS Range: +/- 5 V DC (opt +/- 10 V DC), resolution 0.1 mV DC • DCVG Range: +/- 500mV DC, resolution 0.1 mV DC • ACVG Range: 800mVp-p AC, resolution 1 mV AC • Memory Capacity: Supplied with 8 GB or larger micro SD card • CIPS Impedance: 25 M Ohm or 250 M Ohm • Gradient Impedance: 15 M Ohm • AC Rejection: -90 dB at 60 Hz, <3mV DC error at 100 V AC RMS superimposed • Case: ABS plastic, designed for IP65 • Instrument Size: Hexcorder Pro with tablet assembly 30 x 25 x 10 cm @ 2.7 Kg • Connectors: IP67 rated, push-pull • Battery: Lithium Ion, 3.7V 33Whr = approx. 24 hours run time • Communications: USB 2.0, 2 x Bluetooth 2.1 • GPS: Fully integrated WAAS GPS antenna • Shipping Dims: Hip pack system as 1 piece 10 x 10 x 120 cm @ 2.8 Kg + 1 piece 53 x 23 x 45 cm @ 9.8 Kg Backpack system as 1 piece 108 x 45 x 38 cm @ 24 Kg

 

Tablet Specification**

  • • Ratings: Ruggedized, MIL-STD-810G and IP65 • Processor: Qualcomm Snapdragon 660 octa-core 2.2 GHz • Operating System: Android 8 Oreo (or higher) • Memory: 4 GB RAM, 64 GB SSD • Display: 10.1” WUXGA (1920 x 1200), 500 nits or higher • Primary Battery: Lithium Ion, 98 Whr, hot swappable = approx. 11 hours run time under normal operating conditions • Communications: Wireless LAN 802.11ac, Bluetooth 5.0 • Ports: DC power, 2 x USB 2.0, USB-C, Micro SDXC, RJ-45 ethernet, audio • Camera: 13 MP rear with flash, 5 MP front

 

Save

Firmware Updates

Click here for updates page
Translate »